CHUCK Guitar Amp

CHUCK Guitar Amp

€1,649.00

CHUCK is the amp that redefines your music. With a real tube preamp for warm, organic dynamics and the flexibility of digital technology, it brings the best of both worlds together. No heavy equipment, no complicated setups – just pure sound in a compact, road-ready design.

Pure tube power – anywhere, anytime

CHUCK combines the best of two worlds: the real high-voltage tube preamp delivers warm, organic dynamics, while digital control gives you full command of your sound. No sterile simulation, no flat digital sound – CHUCK sounds and feels like a classic tube amp.

  • Real tube tone – high-voltage preamp with analog dynamics for unmistakable character.
  • Digital flexibility – save sounds as presets and recall them instantly by footswitch or MIDI.
  • Always the perfect level – dynamic power scaling for punchy sound at any volume.

Maximum connectivity – for every stage and every studio

Whether you play live, record in the studio or just practice at home – CHUCK adapts to you. Thanks to modern connections it fits any setup.

  • USB ASIO interface – direct recording with no extra interface needed.
  • XLR direct out – perfect for PA systems or direct studio recording.
  • Headphone output – silent practice with no loss in quality, ideal for late sessions.
  • FX loop and MIDI – full integration into your pedalboard or digital setup.

Ready to play instantly – no waiting, no hassle

With a built-in tuner and IR loader you're ready in seconds – no fiddly cabling, no external gear. Plug & play was never this easy.

  • Built-in tuner – never carry a separate tuner again.
  • IR loader on board – your favorite cab simulations right in the amp.
  • Fast access – all sounds at the push of a button.

Rugged and road-ready – built for the daily grind

CHUCK isn't a delicate studio toy, it's a real workhorse. Thanks to its compact floor format and premium aluminum chassis, it survives every gig, every rehearsal and every tour.

  • Light and compact – no more heavy lugging, fits in any gig bag.
  • Aluminum-steel chassis – durable, rugged and tour-ready.
  • Perfect for live setups – plug straight into the PA and go.

Perfect for every situation – wherever you play

  • Live performers – set up fast, plug in directly, perfect sound without complicated setups.
  • Studio musicians – high-quality direct recording with USB and XLR interfaces for professional results.
  • Bedroom players – silent practice with a headphone output and authentic tube tone at any volume.

Real tubes · 2× E83CC high voltage

10 voicings · Powered by ATE

USB audio interface · MIDI · IR Loader

3.2 kg · Floorboard format · Made in Germany

Visa Mastercard Maestro American Express Apple Pay Google Pay Klarna SOFORT PayPal

Also available at

Find a dealer near you

The world's first
adaptive tube amp.

Powered by ATE — the Adaptive Tube Engine. Ten voicings, ten analog personalities: real tubes, reconfigured at circuit level.

The tubes are real. The behavior is analog. The control is digital. No modeling. No profiling. No capture.

Modelers simulate. CHUCK transforms.

Modelers slice your signal into samples, analyze it, and rebuild it as a digital simulation. CHUCK keeps the signal analog. Two real E83CC tubes shape it continuously — compression, response, harmonics, touch.

Modeler — signal is sampled, analyzed, rebuilt in DSP stages CHUCK — signal stays analog, shaped continuously by real tubes

ATE — Adaptive Tube Engine.

Digital control. Analog creation. ATE uses digital intelligence to reconfigure how two real tubes operate — but the voicing itself is created by real analog circuitry, not a model.

Explore ATE

The tubes are real

Two real vacuum tubes, run at proper operating voltage — CHUCK steps 24 V up to roughly 250 V through a DC-DC converter.

The behavior is analog

Every voicing is created by real analog circuitry. ATE reconfigures how the tubes operate — it never models or samples a sound.

The control is digital

Digital intelligence selects and recalls each analog state. Pick a voicing, store it as a preset, bring it back instantly.

What a voicing is.

Before modelers existed, guitarists chased their tone with a soldering iron. Every mod changed the amp's personality — change it once, change it forever. A voicing is exactly that: an analog operating state of the tube engine, on tap at the push of a button. The tubes stay real, the signal stays analog — only the behavior changes.

More on ATE

Before CHUCK

Open the chassis

Desolder components

Commit to one mod

With CHUCK

Pick a voicing

Stay analog

Keep playing instantly

10 voicings. Hear them right now.

Every voicing is a different analog operating state of the tube engine. Different response, different compression, different harmonics.

The Velvet

Voicing 1 · Clean

Smooth, funky, full of feel. For warm grooves, shimmering chords and playful funk vibes.

The Purist

Voicing 2 · Clean

Clear, open, honest. Timeless clean tone with a warm core and subtle twang.

The Flash

Voicing 3 · Classic

Versatile, vintage, dependable. From clean to crunchy, with compression and rock character.

The Rebel

Voicing 4 · Classic

Stubborn, biting, soulful. A raw, mid-forward sound with just the right edge.

The Spirit

Voicing 5 · Classic

Open, balanced, bursting with classic-rock energy. Crunchy dynamics with an organic flow.

The Drive

Voicing 6 · Classic

Focused, gutsy, full of character. VOX-inspired tone with punch.

The Edge

Voicing 7 · Modern

Sharp, tight, uncompromising. A modern rock sound with razor-sharp precision.

The Beast

Voicing 8 · Modern

Brutal, deep, relentlessly heavy. Maximum punch with scooped mids and a fat low end.

The Tornado

Voicing 9 · Modern

Fat, edgy, cranked to eleven. Power and speed for the heaviest riffs.

The Dreamer

Voicing 10 · Modern

Singing, sleazy, full of drama. Creamy solos, screaming highs, endless sustain.

Hear it in your setup.

Try it at home for 30 days. Free shipping, free returns. If it doesn't convince you — send it back, full refund.

Try it at home for 30 days. Free shipping, free returns. If it doesn't convince you — send it back, full refund.

Why real tubes matter.

Tubes react continuously to your playing — to pick attack, dynamics, level, frequency, gain structure. What players describe as feel, bloom, punch and sag happens in real time inside the circuit. CHUCK leaves that interaction intact.

The tube reacts continuously — compression, harmonics, and touch happen in real time in the circuit itself. Not added. Not modeled. But born.

Where the tubes sit — and everything else too.

The complete CHUCK signal path at a glance. Filled boxes: built-in stages. Outlined boxes: effects and user stages. Everything before the equalizer stays analog.

Always active in the signal path Optional — can be skipped DRY/WET — blends the dry and FX paths back together FX-LOOP — branches off after the WAH · Send/Return for external pedals

Analog stays analog. Under 1 ms.

Your pickup hits a real analog tube stage — no DSP between the input and the preamp output. Only then does the 24-bit DSP take over for effects, IR and routing, at 0.86 ms of base latency: under a millisecond, below the threshold of perception. Only the IR adds to that figure.

More on ATE
0ms
Core Signal Path
Pickup → Speaker
+0ms
FX Loop
external
+0ms
IR Loader
Cab-Sim DSP
+0ms
Wah
User effect

Modern where it matters.

CHUCK keeps the signal analog and puts digital to work where it earns its place — recall, control and updates.

  • Ten analog voicings, switchable in real time
  • Storable presets — seven today, expanding to 49 via a coming software update
  • IR loader with factory and user impulse responses
  • Reverb, delay, chorus and wah on board
  • MIDI and USB audio interface for control and recording
  • Free firmware updates — new voicings and behavior over time

One amp. Every rig.

Guitar cab, PA, another amplifier or your studio — CHUCK adapts to whatever you plug into.

How to connect CHUCK

Guitar cabinet

Drive a passive cab straight from the integrated 25 W power amp — 4, 8 or 16 Ω.

PA / FRFR

Send the balanced outputs with amp simulation and IR straight to front of house or a full-range monitor.

Into an amplifier

Feed a guitar input, an FX return or a power-amp in — CHUCK fits in front of any rig you already own.

Studio

Record through the analog outputs or the built-in USB interface, with independent dual-output routing.

Why guitarists choose CHUCK.

One platform. Made for how you actually play.

For tube purists

Real tubes. Real analog behavior. No compromise.

For modern players

Programmable, recallable, update-ready — a modern workflow without the modeling sound.

For tone explorers

Ten analog personalities. One platform. Endless inspiration.

For amp modders

Circuit-level voicing — without ever opening the chassis.

Customer Reviews

Based on 17 reviews
88%
(15)
6%
(1)
6%
(1)
0%
(0)
0%
(0)
P
Pete Herrmann
Lange gesucht, endlich gefunden - 10 Röhrenamps (Voicings) mit Effekten im Pedalformat

Um erst mal auf das Wesentliche zu kommen. Chuck ist ein Röhrenamp und klingt wie ein Röhrenamp. Dazu hat er noch die für mich wichtigsten Basiseffekte (Reverb, Delay, Chorus, Compressor) mit an Bord und ist sehr einfach zu bedienen. Im Prinzip kann man mit dem Chuck sofort loslegen. Gitarre einstöpseln, den Chuck an eine Gitarrenbox, eine PA oder an seine Lieblingsendstufe anschließen und losrocken.

Oder man taucht tiefer ein, tweakt die Effekte im Expertenmodus und bastelt sich seine 7 Lieblingspresets. Zur Auswahl stehen 2 Cleane Amps (Voicing 2 klingt sehr schön Fender-mäßig), 4 Classic Amps (Marshall und Vox lassen grüßen) und 4 Modern Amps (Richtung Soldano, Bogner, Diezel …). Ich persönlich habe mir 7 Presets mit 2 Clean-, 4 Classic- und 1 Modern Voicing erstellt und gespeichert. Toll ist, dass man im ausgewählten Preset in einen "Pedalmodus" wechseln kann, in dem sich die Effekte ein- und ausschalten lassen, wie man es mit einem Pedalboard gewohnt ist. Die IRs klingen über die PA hammermäßig. Ich habe zudem eine Palmer Box mit einem 1x12" WGS ET65 4 Ohm Speaker. Die 25‑Watt-Endstufe (leider keine Röhre) reicht auf jeden Fall aus, um den Kampf gegen den Drummer zu gewinnen ;-). Den Speaker Output habe ich beim Chuck auf ca. +5 dB eingestellt. Über die PA macht das Ganze aber irgendwie mehr Spaß. Nur mit Gitarre und Chuck zum Proberaum. That´ s it!

Motivation: Warum habe ich mir den Chuck gekauft?
Ich mache jetzt seit mehr als 40 Jahren Musik und habe in der Zeit sehr viele Röhrenamps gespielt. Meinen ersten Amp, einen Fender Vibrolux Reverb, habe ich immer noch. Da man natürlich nicht jünger wird und die guten Röhrenamps (Combos oder Heads + Stack) nunmal einfach schwer sind (dazu kommen noch Pedalboards mit vielen Tretminen, Kabeln, Spannungsversorgung, MIDI‑Steuerung usw.), war ich auf der Suche nach etwas Kompaktem.

Ich bin dann von der Röhre zu verschiedenen Modellern (L6, Kemp, Fract) geswitcht, weil die beim ersten Anspielen unter Kopfhörern einfach hervorragend geklungen haben. Viele Amps, noch mehr Effekte und alles in einer kleinen Box. Toll.
Aber! Das richtige Spielgefühl war nie so richtig da. Ich weiß nicht, wie viele Stunden ich damit verbracht habe, das optimale Profile zu finden und zu tweaken. Dann habe ich immer wieder meinen Fender eingeschaltet und mir gedacht: „Das isses einfach".
Versteht mich nicht falsch. Modeller sind tolle Geräte, haben eine riesige Fanbase, und der geneigte Zuhörer wird den Unterschied zur Röhre nicht hören. Aber es geht eben nicht nur um das Publikum, sondern auch darum, wie ich mich beim Spielen fühle. Und ich fühle mich am wohlsten, wenn ich über einen Röhrenamp spielen kann. Genau dieses Spielgefühl habe ich beim Chuck! Direkte Ansprache, geile Sounds.

Kritikpunkte (Jammern auf hohem Niveau)
– Die Effekte kann man im Easy Mode und im Experten Mode betreiben. Wählt man den Expertenmodus (beim Delay kann man z.B. dann ein Tap-Tempo aktivieren), ist der jeweilige Effect-Drehregler dann inaktiv. Das finde ich schade. Hat man z.B. zu Hause den Effekt etwas zu stark oder schwach eingestellt (MIX Parameter), wäre es toll, wenn man den am Drehregler editieren könnte (wie im Easy Mode).
– Beim Reverb Effekt würde ich mir ein Springreverb Preset wünschen ;-)
– Der Chorus klingt wunderschön warm, wie ein Analogchorus. Hier wäre es natürlich sehr schön noch mehr Presets zur Auswahl zu haben, z.B. Dimension oder einen Phaser. Also insgesamt zusätzliche Effekte mit jedem neuen Firmwareupdate, wie das z.B. bei Fractal der Fall ist.
– Und ja klar, wenn die Auswahlmöglichkeiten steigen, braucht man natürlich auch mehr Speicherplätze und eine zusätzliche Verwaltung über Bänke.
– Das Auto--Wah ist jetzt nicht so mein Ding. Anstelle des Autowah-Schalters hätte ich lieber einen Compressor-Schalter.

Aber wie zuvor erwähnt, das ist Jammern auf hohem Niveau. Für mich steht in erster Linie der Röhrensound im Vordergrund, und der ist einfach klasse.

Underdog, das habt ihr gut gemacht. Ich kann den Chuck einfach nur weiterempfehlen!

Hej Peter!
Vielen Dank für diese unglaublich ausführliche und ehrliche Bewertung!

Es macht uns wirklich stolz zu lesen, wie CHUCK nach so vielen Jahren Erfahrung mit Röhrenamps, Modelern und unterschiedlichsten Setups genau dieses Spielgefühl zurückgebracht hat, das du gesucht hast. Genau dafür haben wir ihn gebaut. 🔥

Und danke auch für deine konstruktiven Hinweise. Solche Details helfen uns enorm bei der Weiterentwicklung. Viele der Themen, die du ansprichst, stehen tatsächlich schon auf unserer Roadmap.

Dass du am Ende sagst „Das isses einfach“. Mehr können wir uns eigentlich nicht wünschen.
Rock on und weiterhin ganz viel Spaß mit CHUCK!
Dein underdog Team

D
Daniel J. Fries - Affector - Gitarrist
Must-Have für Gitarristen: Röhrenamp in Pedalformat!

Echter Röhrensound mit den wichtigsten Effekten in einem Pedalboard. Die Sound-Möglichkeiten sind überwältigend, CHUCK deckt jede Musikrichtung und ihre Soundfärbung ab. A Board in höchster Qualität: Kompressor, Chorus, Delay, Reverb und eine Auto-Wah. Programmierbar auch über Mac/PC. Auch als Interface nutzbar. Einfach direkt mit den Speakersimulationen ins Mischpult oder über die 25 Watt Endstufe in eine Box. Nutze ihn live und im Studio. Ich bin komplett vom Sound, Design und Gesamtkonzept überzeugt.

Hey Daniel,
vielen Dank für deine Bewertung.
Wir freuen uns immer wieder, dass du deine Erfahrungen mit CHUCK und ja wirklich auch deine Freude mit CHUCK teilst.

M
Matthes
Mehr als zufrieden

Vor ca. 2 Monaten kam Chuck zu mir und hat mir von Anfang an, sehr viel Spaß und Freude bereitet. Die Verarbeitung ist hervorragend und aufgrund der geringen Größe und Gewichts fügt er sich auch hervorragend in mein Board mit ein. Zu Hause spiele ich den Chuck über meine PC112 Orange Box und bin mit dem Sound auch wirklich sehr zufrieden. Insgesamt ist die Leistung für zu Hause auch mehr als ausreichend. Die On-Board Effekte klingen super und sind insgesamt gut ausgewählt. Persönlich bin ich kein großer Freund von auto-Wah's, sondern bevorzuge lieber ein „altmodisches Pedal“, was ich einfach dynamischer finde. Aber das ist sicherlich Geschmackssache. Vielleicht könnte man in Zukunft aber trotzdem hier ansetzen und (soweit technisch überhaupt möglich) alternative Effekte (wie Tremolo, Octaver, Phaser oder ähnliches) zur Verfügung stellen, die über die Software ausgetauscht werden können. Ich möchte aber betonen, dies ist eher als ein Verbesserungsvorschlag und nicht als Kritik zu verstehen.

Im Proberaum spiele ich den Chuck direkt in die PA, was mir zunächst ein bisschen Kopfzerbrechen gemacht. Als ich nach einigem Probieren und Hin- und Her das Gefühl hatte, ich komme alleine nicht mehr wirklich weiter (dennoch war mir da auch eigentlich schon klar, dass das Problem VOR dem Gerät sitzt), habe ich kurzentschlossen den Support angeschrieben. Was soll ich sagen: Phänomenal!!!! Eine erste Rückmeldung kam innerhalb weniger Minuten und nachdem ich per Email noch einen Klon meines Chucks hingeschickt hatte, hat sich ein super netter Mitarbeiter über eine Stunde Zeit am Telefon genommen (an seinem freien Tag!) um mir wirklich nochmal ein paar grundsätzliche Tricks, Kniffe und auch Fehler die ich gemacht hatte, aufzuzeigen. Jeden einzelnen Punkt hat sehr ausführlich erklärt, damit ich auch wirklich verstehe warum etwas eventuell problematisch war. Ich habe dann direkt noch zu Hause über die Kopfhörer an den Einstellungen gedreht und bin der Sache einen ganzen Schritt näher gekommen. Auch habe ich das Gefühl, das ich dieses tolle Gerät jetzt einfach auch viel besser verstanden habe, als vorher. Also im nächsten Schritt: ab in den Proberaum und wieder rumprobiert. Inzwischen bin ich mit dem Sound auch über die PA wirklich total zufrieden.

Warum schreibe ich das alles? Ganz einfach, ich habe mich einfach unglaublich gefreut, dass es noch Anbieter gibt, denen Qualität und Kundenzufriedenheit wirklich am Herzen liegt. Klare Kaufempfehlung!

Wow – vielen Dank für dieses ausführliche Feedback!

Hej Matthes,
Es freut uns riesig zu hören, dass CHUCK dir so viel Spaß macht, zu Hause an der Box genauso wie im Proberaum über die PA. Genau für solche flexiblen Setups haben wir ihn gebaut.

Und besonders schön ist für uns natürlich dein Feedback zum Support! Wir geben unser Bestes, damit ihr nicht nur gutes Gear bekommt, sondern auch die Hilfe, die man manchmal braucht, um wirklich alles rauszuholen.

Danke für dein Vertrauen, deine Zeit für diese Bewertung und natürlich auch für die konstruktiven Ideen!

Rock on
dein underdog Team

U
Uwe Flügel
Cooler Sound und einfache Bedienung

Schnell geliefert und schon ausgepackt. War schon wahnsinnig gespannt darauf, den neuen Wegbegleiter Chuck gleich zu testen. Bin begeistert vom Sound und den vielen Variationsmöglichkeiten und freue mich damit auf die neuen musikalischen Hausaufgaben für die Winterzeit, damit wir gemeinsam im kommenden Jahr die Bühnen rocken werden.

Hej Uwe, danke für dein Feedback.
Wir wünschen dir und CHUCK eine geniale musikalische Reise in 2026. Lass uns gern mal was hören!

Rockige Grüße
dein underdog-Team

P
Pascal Astner
bsolute Empfehlung – Gamechanger für mein komplettes Setup!

Ich spiele seit Jahren in einer Punkband und war immer auf der Suche nach einem Rig, das leicht, flexibel und trotzdem richtig drückt. Der CHUCK ist genau das Gerät, das ich gebraucht habe.

Der Sound ist unfassbar direkt und authentisch – kein Plastik, kein Modeler-Gefühl, sondern einfach echter Amp-Punch in kompakter Form. Über In-Ears liefert der Chuck ein glasklares, professionelles Signal, und live über die PA klingt’s absolut mix-ready.

Was mich besonders überzeugt hat:

Die Presets lassen sich komplett anpassen – mit eigenen IRs stellt man sich in Minuten einen Sound hin, der locker mit großen Röhrenamps mithält.

Die Bedienung ist simpel und logisch, kein Overkill, kein Menü-Wahnsinn.

Qualität & Verarbeitung fühlen sich extrem hochwertig an.

Und ganz ehrlich: Der Kundenservice ist absolute Spitzenklasse.
Schnell, freundlich, kompetent – man merkt sofort, dass hier Leute mit Leidenschaft am Werk sind.

Für mich ersetzt der Chuck vollständig meinen bisherigen Amp und macht mein Live- und Studio-Setup so viel unkomplizierter.
Klare 5 Sterne.

Hej Pascal, danke dir für dieses starke Feedback! 🙌
Es freut uns riesig zu hören, wie sehr CHUCK dein Setup verändert hat , denn genau dafür bauen wir das Teil.
Direkt, flexibel, bühnentauglich und ohne Bullshit: Punk-Approved. 🔥

Und dass du unseren Support so hervorhebst, bedeutet uns echt viel!!! Wir geben alles dafür, dass ihr euch mit CHUCK genauso wohlfühlt wie wir.

Danke fürs Vertrauen und fürs Teilen deiner Erfahrung!
Rock on
– dein underdog Team

No more choosing between flexibility and feel.

With CHUCK you get both. Try it for 30 days in your setup. Not convinced? Send it back free.

30-day trial

Order CHUCK, play it for 30 days in your own setup. Not convinced? Send it back free. Full refund.

Order now ›

From 55 € per month

Pay in installments with Klarna, or pay later with PayPal. Try it first, decide later.

Buy in installments ›

Try it in person

Play CHUCK live at Thomann, session, Kirstein and other partner dealers before you decide.

Find a dealer ›

Frequently asked questions.

The answers to what guitarists ask most about CHUCK.

See all questions

What sets CHUCK apart from a modeler like Helix or Kemper?

CHUCK is not a modeler. In the signal path, two real E83CC tubes run at roughly 250 V plate voltage (generated internally from the 24 V power supply) — no DSP between the pickup and the preamp output. Only after that does the digital section kick in for effects, IRs and routing. Under 1 ms of latency in the core signal path.

What is a voicing? And what are the 10 voicings in CHUCK?

A voicing is an analog operating state of the tube engine, on tap at the push of a button. Instead of modeling different amps, CHUCK changes the behavior of the tube circuit itself — compression, response, harmonics. The 10 voicings in CHUCK are curated, built-in personalities across three sonic worlds: Clean, Classic, Modern. Voicings are underdog's concept and part of ATE — Adaptive Tube Engine.

Can I use CHUCK live AND in the studio?

Yes. A 25W power amp for the stage, a built-in USB audio interface (2 in / 2 out, 48 kHz, ASIO) for the studio, and a headphone out for silent practice. Five individually routable outputs, MIDI control, FX Loop, IR Loader.

How does the 30-day trial work?

You order CHUCK with free shipping. You get 30 days to test it in your own setup — stage, studio, home. If it doesn't convince you, you send it back free. Full refund, no questions asked. See our right of withdrawal.

Can I pay in installments?

Yes. Pay in installments with Klarna from 55 €/month. With PayPal you can pay 30 days later — try it first, decide later.

Where can I try CHUCK before buying?

At authorized partner dealers across Europe right now. Live list with filters and addresses at Find a dealer.

What's in the box?

CHUCK · external power supply · USB-C cable · Quick Start Guide · access to the STUDIO software · 2-year manufacturer's warranty.

Are there software and firmware updates?

Yes, free of charge. Through the STUDIO software you load firmware updates straight onto CHUCK. New voicings, behavior models and bug fixes ship regularly. CHUCK gets better over time.

What voltage do the tubes run at?

At roughly 250 V plate voltage on the preamp tubes — real high voltage, not a simulation trick. The 250 V are generated internally from the 24 V power supply. That's the operating voltage where an E83CC first starts to sound characteristic: compression, sag, harmonic overtones. All the numbers in the tech specs.